高级检索

    基于层状双金属氢氧化物的集成电路废水深度除氟进展

    Research Progress on Advanced Treatment of Fluoride-Containing Wastewater from Integrated Circuits Based on Layered Double Hydroxides

    • 摘要: 集成电路湿法刻蚀与清洗废水经钙盐沉淀、混凝和固液分离后,仍可能残留低浓度氟(F−),且往往伴随较高盐度,使后续吸附深度除F−面临选择性下降和材料再生困难等难题。层状双金属氢氧化物(layered double hydroxide, LDH)具有可调的层间阴离子和层板金属位点,能够调控F−的离子交换过程与界面结合行为,在复杂水质条件下展现出选择性除F−的潜力。因此,本文立足集成电路含氟废水的水质特征及主体处理工艺后的深度除F−挑战,系统梳理LDH层间阴离子交换和金属位点结合两类除F−途径,重点分析LDH层间结构与金属位点调控对F−吸附选择性的影响,阐明不同共存阴离子的竞争机制;总结材料解吸再生及连续处理的研究进展,进一步讨论固定床穿透行为、动态传质限制及电极化调控。最后,面向实际水质适应性与连续运行需求,提出综合考虑低浓度选择性、动态处理能力与再生稳定性的材料评价思路,强调实际废水长期连续验证的重要性,为阐明LDH结构调控与实际深度除F−性能之间的关系提供依据。

       

      Abstract:
      Background Wastewater from wet etching and cleaning in integrated-circuit manufacturing contains fluoride and various dissolved salts. Although calcium-based precipitation and solid-liquid separation remove most fluoride, residual fluoride concentrations ranging from a few to several tens of milligrams per liter may persist alongside competing ions. This low-fluoride, high-salinity matrix poses challenges for selective adsorption and stable regeneration.
      Scope and Progress This review examines layered double hydroxides (LDHs) as tunable adsorbents for fluoride polishing after primary treatment, rather than as replacements for bulk fluoride removal or desalination. It relates industrial wastewater characteristics to the requirements of low-concentration adsorption. Two principal removal pathways are distinguished: interlayer anion exchange, governed by the identity and binding stability of pre-existing anions, and fluoride binding at metal hydroxyl sites, influenced by metal composition and local coordination environments. Calcination-induced structural reconstruction offers an additional route for fluoride incorporation into restored interlayers. Structural regulation is examined in terms of interlayer accessibility, exchangeability, site affinity, and the balance between fluoride binding and regenerability. Anion-specific competition from sulfate, phosphate, carbonate, and nitrate is distinguished from ionic-strength effects on interfacial interactions and adsorption equilibria. For saline effluents, this distinction matters because total salt concentration alone cannot predict fluoride selectivity or breakthrough behavior. Potential interference from dissolved silicon, residual particles, elevated calcium concentrations, and pH fluctuations is also discussed.
      Applications Regeneration is evaluated using desorption efficiency, adsorption-capacity recovery, fluoride enrichment, regenerant consumption, and metal leaching as complementary metrics. Continuous treatment is discussed through breakthrough behavior, empty-bed contact time, intraparticle mass-transfer resistance, and the applicability and limitations of Thomas, Yoon-Nelson, and bed-depth/service-time models. In situ bed regeneration and alternating multicolumn operation are considered as potential strategies for continuous treatment. Electrode-integrated LDH systems may facilitate ion migration and electrically controlled fluoride release, although electric-field-driven accumulation does not necessarily enhance selectivity in competing-ion matrices.
      Perspectives Available evidence remains dominated by batch experiments, simplified water matrices, and short-duration continuous tests. Dynamic model predictions, long-term structural stability, and the separation of adsorption from concurrent precipitation require verification using actual pretreated wastewater. Future work should combine realistic fluctuations in water composition with extended breakthrough and regeneration experiments, distinguish incomplete regeneration from irreversible structural degradation, and optimize column switching or electrode-potential protocols. Evaluation should shift from maximum equilibrium adsorption capacity toward cumulative compliant water throughput, regenerant and energy consumption, fluoride-containing waste volume, and material lifetime. Assessment under consistent influent chemistry and effluent targets is essential for translating material findings into practical designs. Such process-level evidence is needed to establish the operating boundaries and engineering feasibility of LDH-based fluoride polishing.

       

    /

    返回文章
    返回